Casting Investment Question

Submitted by JanBarker on Fri, 09/26/2008 - 22:53.

I am shopping for investment materials and all of my references call for silica "flour" 325 mesh.  The closest supplier that I can get pottery plaster and silica from calls the product silica "sand" 325 mesh.  I am hoping that the important thing here is the mesh size, not the name Undecided  Casters, what do you say?

Thanks

0
‹ Fused Glass Installations and Landscapes. embellishments ›

Flour vs. Sand

Submitted by Paul Tarlow on Sat, 09/27/2008 - 23:02.

Jan - silica flour is made by crushing silica sand.  

Ask them if it has a gritty or powdery texture.  If they answer powdery then I think you are okay.

----------------------
Paul
FusedGlass.Org
Helios Kiln Glass Studio
PaulTarlow.com

 

Flour vs Sand part 2

Submitted by JanBarker on Sun, 09/28/2008 - 20:07.

Thanks Paul!  Unfortunately, the small ceramics shop that I purchased from did not have the item in stock, they had to order from their supplier.  If it turns out that I get sand, can I cast my mold and then do a "slip coat" of pure pottery plaster or kiln wash to soften the side where the glass will touch?

Casting

Submitted by rgilbert on Thu, 10/02/2008 - 20:06.

I don't know if the kiln wash will work. I do know that you can buy Satin Cast (original) which will give you a very smooth finish. It's made for metal casting, but it works well with glass.

Mixing your own is certainly much cheaper and I have had good results from home-made mixtures. The finish is not as smooth as Satin Cast, but I have been able to smooth out the interior with fingers, cloth, cotton swabs, and the makeup sponges available in the cosmetic aisles.

When that fails, fire polishing helps. The "tooth" that the homemade investments leave is something which can add to the final item. It really is a matter of taste and application.

 

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.